Rebreather ANDI rEvo Course L2

logo-revoRegistration:
Diving Center SHARK, Autocamp Medulin, 52203 Medulin
www.diving-shark.hr
E-mail: info@diving-shark.hr
Mobile: +385 98 366 110

Location

Theory: Diving Center SHARK
Open-water dives: Mediterranean, Croatia, Medulin

Fees:
€ 1.200,00 for 1 person
€ 1.100,00 per person for 2 persons
Boat-trips, gas and scrubber are not included.
Course fees must be paid in full before the beginning of the course.

Our service: Theoretical and practical instruction, course material, workbook, diving certification card.

Prerequisites: At least 18 years old, Nitrox certification (CSU or equivalent), medical certificate (not older than 1 year – the form is available from us).

Duration: 5 days (about 20 hours theory, 8 open-water dives)

Content

Theory:

  • How a CCR (closed-circuit-rebreather) works
  • Use of the controllers, setting and checking the flow and calibrating the PO2-sensors
  • Special considerations when planning dives using a CCR
  • Hypoxia, Hyperoxia and Hypercapnea
  • Gas management including bailout planning
  • Use of dive computers when diving with CCRs
  • Emergency procedures
  • Functional tests before, during and after the dive
  • Care and maintenance of CCRs
  • Coping with emergencies

Open-water:

  • 8 open water dives in increasing depths
  • Buoyancy peculiarities compared to diving with open systems
  • Specific diving skills and problem management
  • Bailout exercises

 

Pricelist rEvo + spares 2012

Basic rebreather

R13 rEvo III 2012 (non-CE version) standard no tanks/valves/electronics 5488 €
R14 rEvo III 2012 (non-CE version) mini no tanks/valves/electronics 5488 €
R15 rEvo III 2012 (CE version) standard no tanks/valves/electronics 5488 €
R16 rEvo III 2012 (CE version) mini no tanks/valves/electronics 5488 €
R17 rEvo III 2012 micro FT (non-CE version) includes Titanium, Front injection only 6300 €
R18 rEvo III nano FT (non-CE version) includes Titanium, Front injection only 6300 €
R19 rEvo III 2012 micro FT (CE version) includes Titanium, Front injection only 6300 €

Factory installed electronic pack

P1 mCCR with dual rEvodream Next Generation + HUD’s (3 cells) 1204 €
P4 mCCR with SH full trimix OC/CC deco computer + one rEvodream/HUD NG (3 cells) (hardwired*) 2233 €
P5 mCCR with SH full trimix OC/CC deco computer + one rEvodream/HUD NG (3 cells) (fisher connector) 1015 €

* ONLY HARDWIRED CAN BE UPGRADED TO ECCR HYBRID CONTROLLER

P6 eCCR hybrid: setpoint controller: solenoid+orifice+trimix deco (4 cells) + 1 rEvodream/HUD NG 3122 €
P7 rEvodream NG for extra redundancy or if shearwater computer is installed by instructor 602 €
P9 mCCR with rMS light system + one rEvodream/HUD NG (3 cells) 2933 €
P10 eCCR hybrid rMS: full rMS setpoint controller + scrubber monitor + 1 rEvodream/HUD NG (4cells) 3962 €
! Correct CE versions only : P1 / P4+P7 / P5+P7 / P6 / P6+P7/ P9+P7/P10 !

Tanks/valves: europe only (select one set *)

R100 heavy 3l tanks d100mm (4,6kg) + valves (standard unit only) (price is for 2 tanks/valves!) 322
R101 light weight 3l tanks d110mm (3,4kg) + valves (standard and mini) (price is for 2 tanks/valves!) 322
R102 2l tanks d100mm (2,6kg) + valves (mini only) (price is for 2 tanks/valves!) 322
* prices for tanks and valves only apply for first set

Others: free to add

R116 upgrade titanium rEvo III standard and mini 1120
R117 cooper hose upgrade (non-CE) (2 X R534 + R539 + R542 – R503 – 2 X R518) 168
R118 5-cell grid upgrade (+R541 – R548) standard 01/01/2012 21
R119 upgrade to nautec valve on diluent side 36
R120A Front injection only: REPLACES bottom injection ‘normal’ hose lenght (standard/mini) 364
R120B Front injection only: REPLACES bottom injection ‘long’ hose lenght (standard/mini) 364

Part 2: spares (can also be ordered later, not needed at start)

Most intresting spares

R200 oxygen sensor (9,0 – 13mV) performance fully checked at rEvo factory 86
R200A oxygen sensor (10,5 – 13mV) performance fully checked at rEvo factory 94
R201 cover retaining nut 11
R202 O-ring set rEvo II (4 X cover 2 X P-connector 4X barrel) 32
R203 sorb filters (4 pieces) 11
R204 blank plug P-port 17
R205A tank fixation (inclu spanners + plastic) oxygen side 56
R205B tank fixation (inclu spanners + plastic) diluent side 56
R206 sorb casette complete (axial 1,35kg) 84
R207 cell retaining nut (2 pieces) 4
R208 side fixation short 35
R209 side fixation long 35
R210 dual radial scrubber (totals 4kg sorb) complete kit 910
R211 offboard oxygen/dil kit no plug (for rEvo 2008 or later) 200
R212 O-ring set rEvo III (4 X cover 2 X hose connector 4X barrel) 45
R213 Tribolube 71 oxigen grease 2 oz (56 gr) 45
R214 O-ring set for DSV new barrel (4parts!) 6
R215A side fixation quadrolock (only rEvo III) oxygen side 49
R215B side fixation quadrolock (only rEvo III) diluent side 49
R216 rEvo T-shirt (one included with complete rebreather) size: 21
R217A triple dil/oxy/dil offboard block !!!! (MAV) (all BC connectors) 420
R217B triple dil/oxy/dil offboard block (no orifice inside!!) (regulator connectors on inboard inlets) 420
R217C triple dil/oxy/dil offboard block (orifice inside!!) (regulator connectors on inboard inlets) 483
R218 Virkon S box 50 tablets 25
R219A complete hose kit for mounting R217B on rEvo III standard / ‘normal’ hose lenght 189
R219B complete hose kit for mounting R217B on rEvo III mini/micro / ‘normal’ hose lengh t 189
R219C complete hose kit for mounting R217B on rEvo III standard / ‘long’ hose lenght 189
R219D complete hose kit for mounting R217B on rEvo III mini/micro / ‘long’ hose lenght 189
R220 orifice plug (non-rMS) 6
R221 O-ring set battery pack (2 parts) 3
R222 sorb casette complete with rMS probe 252
R223 scrubber retaining screw with spring loading (with handle) (rMS) 20
R224 rEvo checklist, engraved, with boltsnap 20
R225 orifice plug rMS (M5) 6

Extra tanks and valves: for europe only

R250 tank steel 3l 230 bar diam 100 M25*2 (no valve) 140
R251 tank steel 3l 230 bar diam 110 M25*2 (no valve) 140
R252 tank steel 2l 230 bar diam 100 M18*1,5 (no valve) 126
R253A valve 230 bar M25*2 G5/8 OXYGEN 55
R253B valve 230 bar M25*2 G5/8 DILUENT 55
R254A valve 230 bar M18*1,5 G5/8 OXYGEN 55
R254B valve 230 bar M18*1,5 G5/8 DILUENT 55
R255 valve 300 bar (dil) M25*2 G5/8 (aircon) 91
R256 valve 230 bar M25*2 M26 OXYGEN (Nautec) 91
R257 adaptor G5/8 for APEKS DS4-rEvo to convert from oxygen to diluent 42
R258 valve 230 bar M25*2 G5/8 Diluent (Nautec) 91
R259 valve 230 bar M18*1,5 M26 OXYGEN (Nautec) 95

Other spares

R401 rEvodream ‘next generation’ incl clip for HUD 602
R404 shearwater full trimix OC/CC deco computer (hardwired/3xmolex) 1736
R405 shearwater full trimix OC/CC deco computer (fisher, cap, no cable included) 1876
R406 rEvo shearwater hybrid eCCR setpoint controller ‘complete kit’ 2520
R407 rMS light: shearwater rMS, inhale electronics, 2 intelligent canisters 2464
R408 rMS full: shearwater rMS, exhale + inhale electronics, battery pack, 2 intelligent canisters 3528
R419 special deal upgrade P6 -> P10, for units < 3 months old (unit must return to factory) 840
R420 upgrade P2 -> P4 (only code supplied) 763
R421 upgrade P4 -> P6 (unit must return to factorty) 1057
R422 upgrade P2 -> P6 (unit must return to factorty) 1820
R423 cable for shearwater computer including cap: one end fisher connector, other end 3xmolex, PG7 gland 266
R424 cap for fisher connector cable side 28
R425 cel splitter 1 (Y connector molex with one isolator) (rEvodream + shearwater) 17
R426 cel splitter 2 (Y connector molex with two isolators) (2 X shearwater) 20
R427 battery rEvodream CR2450 (set of 2) 7
R428 battery Shearwater Predator/Pursuit LS14500 13
R429 upgrade P9 to full trimix deco 1064
R430 PG7 cable gland with O-ring 3
R431 PG7 plug with O-ring 3
R500 rubber protection rEvodream (/piece) 28
R501 hose protector incl rEvo logo (/piece) 17
R502 cable protector (/piece) 14
R503 hose weights for drager hose (set of 4) 112
R504 orifice module (inclu connetion to 4mm PE) (mCCR) 112
R505 ADV module mounted on SS grid (mCCR) 112
R506 single entry P-plug PG7 cable gland 28
R507 dual entry P-plug PG7 cable gland 42
R509 single entry P-plug 3/8 MP 42
R510 dual entry P-plug: PG7 gland + 3/8 MP (incl 2008) 63
R511 mp hose with inflater connector (30cm) myflex 39
R512 mp hose with inflater connector (95cm) myflex 53
R513 clip for mounting hud on DSV incl screw 17
R514 oxigen gauge with 120cm HP hose 98
R515 diluent gauge with 120cm HP hose 91
R516 cell protection (plastic) 21
R517 fixation rEvodream on pressuregauge including hose protector 28
R518 breathing hose dräger 63
R519 dräger mushroom valve for mouthpiece 15
R520 90° elbow dräger 21
R521 safety mouthpiece (bite-piece with straps) (T53330) 105
R522A clippard assembly complete oxygen side 91
R522B clippard assembly complete diluent side 91
R523A P-port inhale, black 20
R523B P-port exhale red 20
R524 fixing screw for P-port 7
R525A Apeks ‘rEvo’ DS4 oxygen G5/8 (non-CE) 210
R525B Apeks ‘rEvo’ DS4 oxygen M26 (CE) 210
R525C Apeks ‘rEvo’ DS4 diluent G5/8 210
R526 scrubber spring 4
R528 scrubber screen (mesh) 7
R529 scrubber holder (spider) 17
R530 scrubber retaining screw with handle 17
R531 rEvo cover 280
R532 mouthpiece drager complete (inclu rEvo barrel, valves and spider, no bitepiece) 224
R533 sofnolime 797 (1 box: 2 * 4,5kg) 57
R534 breathing hose cooper HC215/24/22 98
R535 P-port plug for cooper hose including SS hose clamps (set of 2) 630
R536 drager valve seat (spider) inhale side (drager part 33932) 11
R537 drager valve seat (spider) exhale side (drager part 33933) 11
R538 handle for barrel DSV (including O-ring and screw) 8
R539 connector set for cooper-hoses to rEvo III housing: insert (2X)+screw (2X)+ SS hose clamp (2X) 98
R540 split stainless steel backplate including rubber protections 119
R541 cell grid (5 cells) 63
R542 hose weights for cooper hoses (set of 4) 112
R543 fixing screw for hose connector rEvo III (drager 51433) 11
R544 window rEvodream including O-ring 22
R545A SS plate fixation for single HUD on clip (R513), flat, incl 2 screws 6
R545B SS plate fixation for dual HUD on clip (R513), flat, incl 4 screws 7
R545C SS plate fixation for dual HUD on clip (R513), high, incl 4 screws 8
R545D SS plate fixation for single HUD on clip (R513), high, incl 2 screws 7
R546A rubber backplate protection top 17
R546B rubber backplate protection bottom 21
R547 stainless plate HUD bracket for Golem clam 10
R548 cell grid (4 cells) 42
R549 break-part RM06758 (for drager mouthpiece T53330) (set of 2) 10
R550 T-connector 2X 3/8F 1X9/16M nikkel plated 21
R551 in-line connector 3/8M 9/16M regulator connector nikkel plated 13
R552 connector set for dräger-hoses to rEvo III housing: insert (2X)+screw (2X)+ SS hose clamp (2X) 98
R553 intersorb 812 (1 box: 2 * 4,5kg) 460
R554 solenoid/valve jaksa + inline filter (no orifice inside) 168
R555 carrying handle rEvo stainless steel including screws rEvo III 60
R556 intersorb 812 (1 keg: 20kg) (62 / 5 kegs) 92
R557 T-connector 3X 3/8F 1X9/16M nikkel plated MAV mini/micro 25
R558 TOP’ marker 8
R559 sensortray for 5 cells, complete, injection moulded 39
R560 scrubber mesh with rubber edge, injection moulded 17
R561 solenoid/valve jaksa + inline filter, orifice and one-way valve inside 245
R562 APR plate first stage O2 7
R563 end caps (male + female) for 5-pin rMS diveCAN cable 48

Upgrades for earlier versions

R700A WOB kit 1 for rEvo II STANDARD (includes R701) 189
R700B WOB kit 1 for rEvo II MINI (includes R701) 189
R701 straight connector on breathinghose (set of 2) (lower WOB) 56
R702 WOB kit 2: new barrel in standard mouthpiece (O-ring sealed) 70
R703 combined OPV/MP/PG7 incl screw incl both plugs 126
R704 low profile triple entry port PG7 ‘deluxe’ 91
R705 hose clamp DSV 37-51mm (already installed on rEvo) 3
R706 DO adjustabel comfort harnass (not upgrade) (incl 2008()already installed on rEvo) 154
R707 spacer set for increased lung volume 112
R708 offboard oxygen/dil kit with single 3/8 24 plug 322
R709 offboard oxygen/dil dith dual 3/8 24 – PG7 plug 343
R710 adding 4th P-port on existing unit (incl 2008) (already installed on rEvo) 126
R711 upgrade cables rEvodream to NG 210
R712 full upgrade kit rEvo CE (only for rEvo III) (includes complete new DS4) 280
R713 reduced upgrade kit rEvo CE (only for rEvo III) (includes only adaptor M26 for DS4) 196
R714 battery clip fixation 9V block 17
R715 body OPV/MP/PG7 (R703) only 63
R716 valve part complete (middle part of OPV R703) 56
R717A engraved disk CE mCCR 80m (old 40m disk must be returned before shipping!) 21
R717B engraved disk CE hCCR 100m (old 40m disk must be returned before shipping!) 21
R718 upgrade kit 2012: includes 1x R224 1x R558 1x R559 2x R560 67
R900 replacement exhale lung rEvo type: 70
R901 replacement inhale lung rEvo type: 112
R902 replacement liner rEvo type: 49
R950 work done at the factory for upgrades/repairs (/hour) 56 €
SOFNOLIME/carbon dioxide absorbent 10 €/kg

Centar za postavke privatnosti